Dear BusinessUser, Hope you are doing good. If you are performing an HA cluster upgrade, it will automatically push the image to secondary device. If your FortiGate is in HA cluster, refer the below document for HA cluster firmware upgrade
To check the issue related to cluster synchronization after firmware upgrade, please check if both devices in cluster are upgraded and then you can follow below document for the cluster synchronization issue:
When upgrading a HA firewall, synchronization errors can occur between the primary and secondary firewalls. To address this issue:
Verify the HA configuration for any misconfigurations. Upgrade the primary firewall first and ensure synchronization before upgrading the secondary firewall. Check firmware compatibility and review release notes for guidance. Troubleshoot synchronization errors by verifying connectivity, restarting the synchronization process, and checking logs. Contact vendor support for further assistance if needed. Automatic firmware push depends on the firewall vendor and configuration, with some offering this feature while others require manual intervention. Consult vendor documentation for specifics.
The Fortinet Security Fabric brings together the concepts of convergence and consolidation to provide comprehensive cybersecurity protection for all users, devices, and applications and across all network edges.