Technical Tip: How to configure a local-in policy ...

ronmar · 01-28-2026

Description This article describes how to configure local-in policies to restrict administrative access from attackers when using a custom HTTPS port. Scope FortiGate. Solution There are instances of unauthorized login attempts on the FortiGate from ...

ronmar · 12-17-2024

Description This article describes how to configure a local-in policy to allow only specific subnets to access the FortiGate using the srcaddr-negate enable option. Scope FortiGate. Solution The local-in policy is being applied to filter or deny loca...

ronmar · 10-23-2024

Description This article describes an issue where the HUB option is greyed out when creating an ADVPN setup using IPSec Wizard. Scope FortiOS. Solution This is due to a Spoke configuration that is still present on the IPSec VPN configuration of the F...

ronmar · 09-17-2024

Description This article provides a workaround for an ongoing issue on the FortiGate-80F-DSL installing /8 connected route. Scope FortiGate-80F-DSL Solution An issue occurred on FortiGate-80F-DSL tested with v7.0.15, v7.2.9, v7.4.4, and v7.6.0 where ...

ronmar · 07-07-2024

Description This article explains an issue with ADVPN with BGP as a routing protocol when redistributing connected routes is enabled after a shortcut is established between Spoke locations. Scope An issue with some of the BGP neighbors will not estab...

ronmar · 12-06-2023

The subinterfaces of the FortiGate is treated as an individual interfaces of FortiGate, It means that you need to create a Firewall policy on each subinterface to be able to allow the traffic to the internet. You can have 3 options to do that. 1st op...

User Statistics

User Activity

Technical Tip: Configure local-in policy to restrict unauthorized administrative access with custom HTTPS port