Re: unable to ping and open local web server from ...

Sherman_P · 08-06-2024

Description This article describes and explains an issue where the gui-waf-profile setting that is enabled on the System -> Feature Visibility page will be lost or disabled after an upgrade or reboot. Scope FortiGate. Solution The following logs are ...

Sherman_P · 02-19-2024

Description This article describes that the address range configured under ‘config authentication-rule’ will take precedence over what is configured under ‘config vpn ssl settings'. Example: config vpn ssl settings set servercert "Fortinet_Factory" s...

Sherman_P · 12-01-2023

Description This article describes how to solve when seeing this error: received notify type authentication_failed. Scope FortiGate. Solution By executing the following commands: diag debug resetdiag debug console timestamp enablediag debug applicati...

Sherman_P · 06-18-2024

Hi @Umirzak , Is PING allowed on HQ office? Sometime it has something to do with the Windows Firewall so it is worth checking. You may refer to the following article: https://community.fortinet.com/t5/FortiGate/Troubleshooting-Tip-Unable-to-Ping-Dest...

Sherman_P · 05-22-2024

Hi @duplicate, Have you had any firmware update recently? Are there other SDWAN rules configured without name? If yes, please try to add names for these rules via CLI and after that create another sdwan rule in GUI to verify if the "duplicate entry f...

Sherman_P · 05-22-2024

Hi @meeresfrüchte, You may want to refer to the following KB if you intend to configure the automatic failover in the future. https://community.fortinet.com/t5/FortiGate/Technical-Tip-Redundant-Internet-connection-without-load/ta-p/197694

User Statistics

User Activity

Troubleshooting Tip: The gui-waf-profile setting in the System -> Feature Visibility page is not retained after a FortiGate reboot or upgrade

Troubleshooting Tip: SSL VPN is connected but is not getting the intended IP address from the configured address range

Technical Tip: IPSEC VPN Tunnel between FortiGate and AWS using IKEv2 is not getting established due to received notify type authentication_failed error

Re: unable to ping and open local web server from branch office.

Re: Not able to name SD-Wan rule

Re: How to define Gateway on WAN Interface ? FortiWIFI 60D

Re: unable to ping and open local web server from ...

Re: Not able to name SD-Wan rule

Technical Tip: IPSEC VPN Tunnel between FortiGate ...

Re: How to define Gateway on WAN Interface ? Forti...

Troubleshooting Tip: SSL VPN is connected but is n...

KCS