Fortinet Community

akumarr · 12-31-2021

Description This article describes how to get notifications when Fortiguard web filter is unreachable. Scope FortiGate Solution Enabling UTM in the IPv4/firewall policy is the best practice.However, due to multiple reasons, the FortiGuard web filter ...

akumarr · 12-31-2021

Description This article describes how to troubleshoot the LDAP issue for SSL-VPN. Scope FortiGate Solution SSL-VPN tunnel mode is enabled in the firewall and the Ldap users are imported to the FortiGate.So it is necessary to make sure the actual LDA...

akumarr · 12-31-2021

Description This article describes the method to block all the web sites while allowing one website/URL. Scope Solution Go to Policy and objects -> IPv4/firewall policy. Create a LAN to WAN policy. Create a web filter profile and block all the FortiG...

akumarr · 12-31-2021

Description This article describes how to get an email alert if someone declines the Login Disclaimer. Scope Solution It is recommended to keep a post or pre-login banner so that the users who try to log in will be prompted with the disclaimer.To ena...

akumarr · 12-31-2021

Description This article describes how to troubleshoot the RADIUS issue for SSL-VPN. Scope FortiGate Solution SSL VPN tunnel mode is enabled in the firewall and the radius users are imported to the FortiGate.So it is necessary to make sure the actual...

akumarr · 09-18-2022

Dear Customer.May I know whether the Iphone on Site B is connected to the Fortigate by WIFI or do you have SSL VPN connection?

akumarr · 09-18-2022

Dear vveckaln,May I know whether the issue is happening only for one user or for all ?Could you also confirm if split tunnel is enabled or disabled on Fortigate?

akumarr · 09-18-2022

Dear Customer.From the output, I could see that "No matching IPsec selector, drop.This means the Local/Remote subnet is not matching under Phase2 selectors.Navigate to IPsec tunnels, edit the tunnels, and under Phase 2 selectors please verify if the ...

akumarr · 09-02-2022

Dear RenatoMMay I know whether the issue is happening for a specific Forticlient version?Could you please remove the complete Forticlient using this tool?https://kb.fortinet.com/kb/documentLink.do?externalID=FD40369And then try using a different fort...

akumarr · 09-02-2022

Dear Kiclee.I understand that you are using an external threat feed,So may I know whether "View entries" is not showing the "#" ?

Fortinet Community

User Statistics

User Activity

Technical Tip: How to get notification email when FortiGuard web filter is unrechable

Technical Tip : Forticlient LDAP users are getting 'credential or ssl vpn configuration is wrong (-7200)'

Technical Tip: How To block all the web sites while allowing one website/URL.

Technical Tip : Get email alert if someone decline the Login Disclaimer

Technical Tip: Credential or SSL-VPN configuration is wrong (-7200) Radius user

Re: Unable to get iPhone mail via WiFi on FortiGate 100E

Re: No Internet on Ubuntu after installing FortiClient

Re: IPSec VPN Clients Accessing Remote Subnets across Site to Site VPN

Re: FortiClient VPN issue

Re: Can I write comments in txt file for Threat Feed?

Re: No Internet on Ubuntu after installing FortiCl...

Re: SSL VPN traffic problem with IPsec VPN to Azur...

Re: Routing of incoming http requests based on dom...

Re: Question regarding IPS profiles on firewall po...

Technical Tip : How negate command in debug flow w...

Re: SSL VPN traffic problem with IPsec VPN to Azur...

Re: Routing of incoming http requests based on dom...