Description This article describes how to get notifications when
Fortiguard web filter is unreachable. Scope FortiGate Solution Enabling
UTM in the IPv4/firewall policy is the best practice.However, due to
multiple reasons, the FortiGuard web filter ...
Description This article describes how to troubleshoot the LDAP issue
for SSL-VPN. Scope FortiGate Solution SSL-VPN tunnel mode is enabled in
the firewall and the Ldap users are imported to the FortiGate.So it is
necessary to make sure the actual LDA...
Description This article describes the method to block all the web sites
while allowing one website/URL. Scope Solution Go to Policy and objects
-> IPv4/firewall policy. Create a LAN to WAN policy. Create a web filter
profile and block all the FortiG...
Description This article describes how to get an email alert if someone
declines the Login Disclaimer. Scope Solution It is recommended to keep
a post or pre-login banner so that the users who try to log in will be
prompted with the disclaimer.To ena...
Description This article describes how to troubleshoot the RADIUS issue
for SSL-VPN. Scope FortiGate Solution SSL VPN tunnel mode is enabled in
the firewall and the radius users are imported to the FortiGate.So it is
necessary to make sure the actual...
To access the DMZ server over the internet kindly create a VIP.External
IP as 126.96.36.199 and Mapped IP as 10.168.35.202, the external interface
as WAN2 and mapped interface as DMZ.After creating a VIP create a policy
from WAN to DMZ with source as a...
Could you please share the output for the below-mentioned
commands?config firewall policyedit sh fullendTo check the
policy ID Kindly check the related policy on device GUI(Policy and
objects >> Firewall policy/IPv4 policy)May I know whether do you c...