Hi all, I have a video conference server (Polycom) in my local network
and Nat port forwarding from outside in Polycom server, but it didn't
work well. I also enable Voip service in system\config\feature .I did on
H.323 range port. Any advise for me ...
hi all, My fortigate (310B) is receiving a very high input traffic on
interface facing the internet, but there are a little traffic on inside
interface(facing Lan network), i am afraid of someone is attacking or
scan port to my fortigate. So which CL...
hi all, I'm using Fortigate for firewall and routing for my company. I
have 3 sites make a ring
Site1(FG110C)--Site2(FG110C)--SiteDataCenter(FG310B) and they are
operating with static routing. Site1 has 200 end user and site 2 is the
same. I want to ...
Hi all,I need to upgrade firmware for FG110C from v4.0(MR3 patch 9) to
5.2. I know the path:4.0 MR3 patch9 637 ► 4.3.11 ► 4.3.18 ► 5.0.12 ►
5.2.5But I cannot see 4.3.11 and 4.3.18 in firmware images directory of
support.fortinet.com. And 5.0.12, 5.2....
Hi all, My fortigate 110C usually has high CPU problem. I checked the
enviroment (temperature, fan...) all is ok. On fortigate, I configured
many policy route, I think it is reason for this problem. so how many
policy route entry Fortigare recommend ...
Thanks for your recommend, I have to use dynamic routing because of
making backup routes which static routing cannot do (when the connection
between Site1--SiteDataCenter down, the end user at Site1 will be routed
to site2 to reach to SiteDataCenter)...
