Does the 60C DHCP Server support assigns over 255 IP addresses on
internal interface? i.e. DHCP Server Address Range:
192.168.3.2~192.168.10.254, Netmask: 255.255.0.0 ?
To set a maximum of five failed authentication attempts before the
blackout, using the following CLI command: config user setting set
auth-invalid-max 5 end But can' t work in v5.0.2
ORIGINAL: pcraponi I heard that 60D will have a hardware revision where
the internal disk will be removed.... So, i think that it will not
return on actual hardware and new patchs... That' s mean the 60D will
not get internal disk anymore even the ne...
5.0.1 (build 4108) ORIGINAL: Selective I just looked on the PDF and
webpage of the 60D. They have removed everything regarding the internal
disk So we probably won´t see any disk in 5.0.3 either....... So the
5.0.1 (build 4108) for 60D is the latest...
ORIGINAL: rwpatterson No. Are you married to that address range? If all
you need is 8 class C address spaces, try using a supernet of
192.168.8.0/21. This will get you 192.168.8.0-192.168.15.255. (Subnet
mask 255.255.248.0) Just a sample for " DHCP S...
ORIGINAL: emnoc Op, here' s the specs on the max limits & values,
http://docs.fortinet.com/fgt/techdocs/fortigate-max-values.pdf As an
alternative to moving the dhcp server off the firewall, you could use a
dhcp-relay option. So I can' t set " DHCP S...
I also have 3 public IP (External IP) and want to reply PING from 2nd
and 3rd IP, I have create a 1:1 NAT to 2nd and 3rd public IP in Virtual
IP but can' t get PING working on 2nd and 3rd IP, only the 1st Public IP
can reply PING, do I need to create...