Hi everyone,could you help me for this issue ? When I want to two
interfaces on fortiswitches for trunk group.I see that warnings and it
can not allowed for adding these interfaces.However same switch I use
trunk group for different interfaces.I live...
My Fortigate firewall and Fortiswitches are defined and working
synchronously on Fortimanager. I want automatic backups of the firewalls
and switches on a regular schedule, for example once a week. How can I
do this?
"Hello everyone, can you help me with an issue? I have 2 HA
Active-Passive Firewalls, and the HA configuration is successful. I've
connected 2 FortiSwitches to my Active Firewall using FortiLink, and
I've also set up MC-LAG between the 2 FortiSwitche...
Yes I got it alarm button is related to major and minor alarm However
wehn I plugged out one of my psu ,there is no alarm in alarm button in
front of firewall.Therefoe Is there any configuration for settings
missing psu for minor or major alarms ?
Yes I checked there is no references interface that why it reason but ı
recognize when I change de a vlan on wifi switch controller for that
switch inteface ,switch can not apply this configuration adn when I
connect to switch cli ssh and I recognize...
Yes I checked there is no references interface that why it reason but ı
recognize when I change de a vlan on wifi switch controller for that
switch inteface ,switch can not apply this configuration adn when I
connect to switch cli ssh and I recognize...
Error: Static/Sticky MAC entry (id=5) exists in the trunk member port
port5 !!!. Also this warning change when I try different ports for
example sometimes port4,port1 so when I check the static address and
sticky Mac I don’t use
How can I check switch interface for indenpendincies or references by
the way as ı remember ı use these interface just that but for your
suggestion how can ı check it
