Have read somewhere: On both FortiSwitches you have to change the STP
announcement type from both to single.Set to both to allow both core
switches of an MCLAG to transmit STP BPDUs. Set to single to prevent
both core switches of an MCLAG from transm...
If you configure and activate MCLAG you have to be aware of namings of
interface, port, physical port, trunk, and trunkgoup. For my
understanding - or in my opinion:a classical trunk ( or classical
portchannel (static, lacp active, lacp slave)) is lo...
Be aware of the limit of the ussage of 15 Vlans + Native Vlan (untagged)
if you are configure interoperabity to Pvst+. e.g. edit "port3" set
rpvst-port enable We are working at the same issue with MST. It is not
possible to configure the default (Reg...
