Support Forum
The Forums are a place to find answers on a range of Fortinet products from peers and product experts.
CEMS
New Contributor

Alarm Button -PSU

Why doesn't the alarm button on the device blink red when one of the firewall psu's fails or when I pull its power?

2 REPLIES 2
parteeksharma

Hi CEMS,
Hope you are doing good.
Please be informed that different hardware models have different Front Panel and LED status information and also for most of the devices  Power and Alarm LED have different functioning. 
Kindly check the below link for LED status information on the box
https://docs.fortinet.com/document/fortigate/7.6.0/administration-guide/997251/leds


Regards,
Parteek

CEMS
New Contributor

Yes I got it alarm button is related to major and minor alarm However wehn I plugged out one of my psu ,there is no alarm  in alarm button in front of firewall.Therefoe Is there any configuration for settings missing psu for minor or major alarms ?

Announcements

Select Forum Responses to become Knowledge Articles!

Select the “Nominate to Knowledge Base” button to recommend a forum post to become a knowledge article.

Labels
Top Kudoed Authors