I have a FortiIsolator in version 2.4.7 build 1120 I'm trying to hook it
up to my FAZ in version 7.2.10 build 1682 but I'm having problems after
hooking the device up to the FortiAnalyzer.Below are the test already
done: - Release compatibility betwe...
Hello everyone!I am having this problem with my FGT 80F release 7.6.2F
build 3462, using a Fortinet SFP model FN-TRAN-SX.Below is my
environment:- The device connected on the WAN 2 interface only supports
speed 100 full.- Whether connected via copper...
Hello everyone,I am sending the logs from our EMS server directly to our
FAZ as the syslog server option.I wanted to know if the logs sent from
the EMS to a FortyAnalyzer are unencrypted or are they encrypted ?From
the EMS server GUI the commands are...
In the GCP environment I set up the VM where I installed the ova file
downloaded directly from the Support Fortinet site (see below for
example) After installation I tried logging in with the default
credentials both in SSH and from the GUI but I get...
Hello everyone,I have a FortiSandbox 2000E appliance with VM license,
below is the SKU:(FSA-2000E-UPG-LIC-BYOL) can you confirm me that this
license only handles the number of clones up to 20 ?On board the machine
I have only Windows 7, 8 and 10 keys...
Hi @HarryTran !Thank you for your prompt reply.Regarding the tests you
carried out in your laboratory environment, we also performed these
tests on our 80F and found that the interface speed is 100 and the
duplex is full.In our case, please note that...
Hi @HarryTran,Just to remind you, the device connected to WAN 2 has only
one network card and only has a fiber connection, supporting only 100
speeds, not auto. Furthermore, by connecting the same device on WAN 2
(Shared port RJ45) with mediaconvert ...
Hi @HarryTran,In addition to the outputs already provided below, here is
the specific output you requested. You will also find the command
"diagnose hardware deviceinfo nic wan2"We look forward to hearing from
you. Extra output wan2 Best Regards
Hi @HarryTran,Thank you for your prompt response. In the meantime, I can
provide you the installed SFP specification and the WAN2 interface
configuration.Official FORTINET SFP model GBIC FN-TRAN-SXFGT80F-1# show
system interface wan2config system int...
Hi @HarryTran,After some time, we were able to test what you suggested,
but the problem persists.The Fortigate in question is running version
7.6.2F build 3462, but even forcing the SFP into fiber mode (with the
command you suggested) doesn't recogni...
