Technical Tip: OSPF Resource List

[nprakash]

Description

This article lists resources that can be used to configure and troubleshoot OSPF on FortiGate.

Scope

FortiGate.

Solution

#	OSPF CONFIGURATION
1	Configuring OSPF between two FortiGates
2	ABR and ASBR configuration guide
3	Passive Interface Configuration
4	Configuring OSPF Stub Areas
5	OSPF Graceful Restart
6	Advertising Loopback network into OSPF
7	Configuring MD5 Authentication
8	Implementing OSPF SPF scheduling
9	Configuring OSPF virtual-link
10	Route Summarization in OSPF
11	OSPF NBMA Configuration
12	Changing hello and dead timers in OSPF
13	Configuring OSPFv3 in FortiGate
14	VRF support for OSPF
15	OSPF over an GRE tunnel
16	OSPF route redundancy over IPsec tunnel
17	OSFP over dial-up IPsec tunnel
18	Configuring OSPF in ADVPN
19	Prevent OSPF packets sent on secondary IP
20	How the OSPF default-information-metric type 1 and type 2 work when default-information-originate is...
21	OSFP redundancy with IPSEC VPN
22	OSPF Distribute List configuration
23	Duplicate OSPF router ID
24	Graceful restart and non-stop forwarding for OSPF in FortiGate HA
ROUTE MANIPULATION / FILTERING IN OSPF
23	Redistributing static route in OSPF
24	Advertise default route in OSPF
25	Configuring route tag for a OSPF network
26	Redistributing default route in OSPF
27	Route filtering using distribute list
28	Route filtering using filter list
TROUBLESHOOTING OSPF IN FORTIGATE
29	OSPF Neighbor stuck in INIT state
30	OSPF Neighbor stuck in 2-way state
31	OSPF Neighbor stuck in EXSTART/EXCHANGE state
32	Troubleshooting forward address in OSPF NSSA area
33	Duplicate OSPF router-id
34	MTU mismatch in OSPF
35	Checking OSPF session in FortiGate
36	Maximum number of OSPF neighbors
37	OSPF adjacency down on IPSec interface due to Hello timer expire only 1-way state
38	Technical Tip: How to troubleshoot OSPF neighborship in various states
39	How to configure OSPF with virtual wire pair interfaces