Description This article describes how to resolve the 'Error updating
FSCI -1' message that appears when connecting to the FortiGuard Server.
Scope FortiGuard. Solution The following error emerges upon running the
debug: diag debug resetdiagnose debu...
Description This article describes how to fix an issue where Application
Name SSL blocks a website. Scope FortiGate. Solution The forward logs
will show that the site is blocked by UTM: specifically, the Application
Name SSL. In this example, an exam...
Description This article describes how to set up IPS packet capture
logging. Scope FortiGate. Solution Auto-capturing of packets if they
match an IPS anomaly. This enhances the view of erroneous or suspicious
packets. This feature can be enabled with...
Description This article describes how to limit bandwidth usage for a
specific user. Scope FortiGate. Solution The following is a step-by-step
guide on how to limit bandwidth usage for specific users: Create
addresses. Create Per-IP Traffic Shapers. ...
Description This article describes how to create packet capture at the
policy level. Scope FortiGate. Solution This guide shows how to create
an automated packet capture. It is possible to enable packet capture on
the firewall policy using the below ...
Dear zoolcoo, We are not sure if you can use the Fortinet logo, but can
you please try to contact brand@fortinet.com for any questions or
guidance on the registered trademark usage.
Hi @Perau_OS The FortiAP U231F is not a UTM (Unified Threat Management)
model. To determine if a FortiAP is UTM capable, you can use the
Security Rating feature in the Fortinet Security Fabric. Here's how you
can check: Go to Security Fabric > Securi...
Hi @MaxH You can follow the below guide to set up the
VIP.https://community.fortinet.com/t5/FortiGate/Technical-Tip-Virtual-IP-VIP-port-forwarding-configuration/ta-p/198143
Dear @RobNS To double check and verify please follow the below steps:
Log into the FortiGate GUI. Select the Dashboard. Navigate to Network
and then select SSL VPN. The username of the connected user will appear.
Right-click on the user and select 'V...