Description In this article scenario, FortiGate's port1(wan1) and
port2(wan2) is connected to two Internet Service Providers. Goal to
setup WAN1 as the Primary connection and WAN2 as Secondary connection.
If WAN1 fails (link state / path) then WAN2 s...
Description FortiGate Firmware Upgrade can be done from the Firewall's
GUI and CLI. TFTP is one of the method available in the CLI for
upgrading the firmware. This Video will demonstrate the steps involved
in upgrading the firmware using TFTP method....
Description This article explains how to configure an SSL VPN with an
external DHCP server. Scope This feature was introduced in FOS 7.0.6 and
FOS 7.2.1. Solution SSL VPN users should get IP addresses from the
external DHCP server (DHCP_SRV). Below i...
Description This article below displays the list of articles related to
BGP Configuration and Troubleshooting. # Title 1 BGP Neighbor Adjacency
States 2 Configure BGP ASN (4 Bytes) 3 Configure BGP Route Reflector 4
Configure BGP over GRE 5 Configure ...
Description This article describes FortiGate High Availability Resource
List. High availability (HA) is usually required in a system where there
is high demand for little downtime. There are usually hot-swaps, backup
routes, or standby backup units a...