|
Check the output of the following commands:
exec sensor list
exec sensor details
See the following example output:
Sensor ID : FAN5 (0x45)
Entity ID : 29.5
Sensor Type (Threshold) : Fan
Sensor Reading : 0 (+/- 0) RPM <----- Value 0 shows a problem.
Status : Lower Non-Recoverable
Lower Non-Recoverable : 300.000
Lower Critical : 500.000
Lower Non-Critical : 700.000
Upper Non-Critical : 25300.000
Upper Critical : 25400.000
Upper Non-Recoverable : 25500.000
Positive Hysteresis : 100.000
Negative Hysteresis : 100.000
Assertion Events : lcr- lnr-
Assertions Enabled : lcr- lnr- ucr+ unr+
Deassertions Enabled : lcr- lnr- ucr+ unr+
FAN5 | 0.000 | RPM | nr | 300.000 | 500.000 | 700.000 | 25300.000 | 25400.000 | 25500.000
(status should be OK)
NR (non-recoverable) status indicates temperature or power level change that may not be allowed, depending on the specifications of the device.
Open a FortiAnalyzer Ticket with Tech Support if an RMA is required.
Related article:
Technical Tip: How to migrate a FortiAnalyzer log and config to a new system after an RMA or a Forti...
|
