Description This article describes steps when troubleshooting a
FortiGate Session Persistence (FGSP) cluster member that has left or
disconnected from the cluster. Scope FortiGate FGSP. Solution FGSP is
Fortinet's proprietary technology for high avai...
Description This article describes how to fix an issue where the
FortiGate license/subscription is not updating. Scope FortiGate,
FortiOS. Solution Verify that the FortiGates are in an HA cluster. get
system ha status Confirm that the cluster member ...
Description This article describes the process of moving Wi-Fi SSID
tunnel to a faster interface. For instance, the current FortiAP (FAP)'s
SSIDs are connected to a 1G port3 and network administrator prefer to
move that to a 10G x1 interface. Scope F...
Description This article describes the commands necessary to
troubleshoot FortiWeb Log issues. Scope FortiWeb. Solution Check hard
disk health. execute smart enable execute smart self-test Let the
self-test run, preferably during non-business hours, ...
Description This article describes how to debug the Video Filter when a
YouTube filter is not working correctly. Scope FortiGate, FortiOS 7.0.x
and 7.2+. Solution Double-check the video filter configuration settings.
Ensure that traffic matched the e...
Try to upgrade the NIC's firmware first. Next, double check the WiFi's
Advanced settings and set the "Property" to the desired "Value". 1.
Click Start>Run and open devmgmt.msc 2. Collapsed Network Adapters,
right click the Wi-Fi, and click Advanced. ...
VIP are needed only if you want to access certain IP address and you
want to forward specific or all traffic to a different IP address. For
instance, if you want to access the device from outside through your
public IP address -- since it's biometric...
First, I suggest that you verify your current certification status via
training.fortinet.com Next, visit this link for further information: How
to get Certified for Cybersecurity | Fortinet If you have a valid NSE7,
you'll need to take another exam t...
Hello Jesse, Try to see if you have access to FCP - FortiManager 7.2
Self-Paced 1. Open training.fortinet.com 2. Click Login, then Public. 3.
Click Sign Up 4. Browse to Library>FCP Network Security Note: * Access
to FMG training is available based on...