Dear Sir, We have a almalinux server running a website. This server has
a dedicated Public IP.We want to change its private IP address from
192.168.3.A to 192.168.3.B.Before changing the private IP, we have
duplicated all relate Fortigate firewall po...
Dears, Recently I configured SSL-VPN in our Fortigate 40F.The connection
is successfull in my iPhone but it doesn't on my MacBook Pro with MacOS
15.I have read this:
https://community.fortinet.com/t5/Support-Forum/MacOs-Sequoia-15-0-support-for-Forti...
Dears, I recently configure SSL-VPN on my Fortigate 40F.The connection
is successful in my iPhone.Howevver, I found that I can only connect to
our internal NAS/server using its private IP, like 192.168.3.x.I have
set the A record of our NAS/server wi...
Hi everyone, I have a Fortigate 30E and zyxel GS1900 switch in my
office. We have two VLANs and the routing is 'Router on a Stick' mode.
Recently we found the inter-VLAN is slower than speed inside the same
VLAN. Here are our test results using iPerf...
Hi,We have a Fortigate 30E and a Zyxel GS1900 Switch in our office.We
recently created a new VLAN (192.168.3.x) and put all our servers and
NAS in this VLAN.Our office PC remains in the original VLAN
(192.168.0.x). My colleagues report that after cha...
HiI tried to run the debug flow command at a live site but I didn’t see
any output . Can you provide any example of running the debug flow tool?
Thank you
Dear All, I just realized that the issue only happened in my iPhone.I
have no problems when using windows to connect by FQDN.If using iPhone,
I can only connect by private IP, not. FQDN.
Dear @adimailig I cannot connect to the fully qualified domain
(hostname.fully_qualified_domain.local).I have also added DNS suffix on
my SSL VPN configuration. Do you have any advises?Thank you.