Hi all,our current setup is FG 80f acting as a firewall and NAT device
with Layer3 switch acting as a router for office network and intervlan
routing.We would like to replace current layer3 switch with 2 switches
from Forti ecosystem that can act as ...
Hi all,In scenario with two location connected via ipsec tunnel, remote
office is accessing internet through wan port in main office, is it
possible to capture and send traffic, remote office - internet and vice
versa traffic, to analysis sensor?Some...
Hi and sory for late answer, i was on free days....Yes, im aware of
that, but since these switches are first to have that feature there is
no other option. I do believe that after some time replacing FG with
stronger model is not going to be problema...
Hi Aek, so....Good thing is that interVLAN traffic no more needs to pass
through FG, but bad news is that i must pay extra for that and also bad
VRRP and rest of L3 goodies is available only in standalone mode.So, my
setup could/would like this:1FG 8...
Hi,yes it has been solved.AD is needed, but mine was RADIUS server as an
authentication service.All groups intended for VPN needs to be mapped
into portal, after that just put them into FW policy as intended.Cheers!
Hi all and sorry for resurrecting old topic.I have something similar to
achieve. My goal is to create more than one group for VPN access.1 for
remote employees, 1 fore contractors, 1 for admins. Each group is going
to have different level of access f...
Toshi,one more thing, i thought of setting rspan mirror on port where
FSW and FG are connected and send to collector on other side of tunnel.
I will try also with sflow.Ty so much,Drazen
