Description This article describes how to troubleshoot FortiGate not
joining HA Cluster due to an HA password mismatch. Scope FortiGate, all
versions. Solution Run the following command to verify why FortiGate is
not joining the HA cluster. diagnose ...
Description This article describes how to configure an automation stitch
for a specific IPSEC tunnel to get an alert email for status changes.
Scope FortiGate. Solution Create an automation stitch for email alerts
for IPSEC tunnel status changes. Go ...
Description This article describes how to configure an automation stitch
to receive an email alert for an account with a super_admin profile
login. Scope FortiGate. Solution Create a new Automation stitch: Next,
configure a trigger for an admin with ...
Description In some cases, it is possible to reach the FortiGate via
ping, but it is not possible to take SSH or Web access(GUI) access to
the firewall. This article will describe how to troubleshoot this issue.
Scope FortiGate. Solution The user is ...
Description This article describes how to authenticate users/user groups
for blocked categories using web rating override. It can be configured
as flow or proxy-based. Scope FortiGate. Solution Create a web-filter
profile, and block the category in t...
Hello Stefan, To achieve the traffic prioritization scenario you
described with three VLANs (server, clients, other) using the full
bandwidth of your WAN interface while ensuring the server gets full
bandwidth priority when needed, you can follow the...
Hello @Mirza_Asad2723 , can you verify if the traffic is coming to the
firewall of first remote gateway with the help of sniffer. di sniffer
packet any "host x.x.x.x and host y.y.y.y.y and port sslvpn-port" 4 0 l
x.x.x.x ---remote gateway IP y.y.y.y ...
Hello @hannq, In this scenario, if the WAN connection is up and there is
an issue on the ISP side. WAN port status is up then Primary FGT will
still forward the traffic on the WAN interface to the next hop(ISP
router)If the WAN interface status is do...
