Hi, I've set up an active/passive configuration of Fortigate on Azure,
running FortiOS 7.2.5 with SDN connector failover.From the public IP
site, no problems: when FW A is active, public IP points to it, and the
same happens when FW B is active.A pro...
Hi,I'm setting up a Fortigate on Azure in an HA active7active setup as
described in the docs:
https://docs.fortinet.com/document/fortigate-public-cloud/7.2.0/azure-administration-guide/983245/ha-for-fortigate-vm-on-azure
Specifically, i've followed t...
Hi, I have a FortiGate # 80F which has a working VPN with my Windows NPS
(which is on one Windows AD DC) on Azure All the clients on the LAN
where 80F's internal port is can reach the server and do their
authentication tasks. 80F can't: I can't ping ...
Hi, I'm translating the login page replacement message on a FortiGate
80F. How can I modify the "Please enter your username and password to
continue" contained into %%QUESTION%% variable. Ok, I can delete the
reference and insert a static text, but I...
Hi, I have a FortiGate 80F with FortiAP P433API've already successfully
set up a SSID local bridge for the colleagues in the office. Right now
I'd like to create a guest SSID with captive portal authentication.I've
created the SSID, type tunnel, on a...
Hi @vvarangoulis , could you please be a little more specific?How having
different routes for every FGT will solve my problem?I have to set up a
route table in the domain controller vNet so it can reach the internal
interface of the FGT that's active...
Hi @Anonymous , yes, and it orked perfectly. My question is how to
translate %%QUESTION%%. I see two ways: Replace it with static text.
Fast but it's not the correct way to do that.Edit %%QUESTION%%
somewhere. Where? Is it possible?Of couse I would l...
Hi Markus,thanks for your answer. What I need is what Cisco calls lobby
portal, i.e. a portal where receptionist can create access credentials
for guests with say a duration of 1 day. Is it something possible with
fortigate captive portal or do I nee...
Hi, FW01-FGT-A # get router info routing-table allCodes: K - kernel, C -
connected, S - static, R - RIP, B - BGPO - OSPF, IA - OSPF inter areaN1
- OSPF NSSA external type 1, N2 - OSPF NSSA external type 2E1 - OSPF
external type 1, E2 - OSPF external ...
By the way, I've replaced the 10.129.1.6 with 10.129.1.5 for other
reasons (independent from this issue). Anyway, from web cli and from ssh
I can ping 10.129.1.5.From my client connected with Forticlient I
can't.Traceroute to this IP gives: Traccia i...
