Hi Team, I am looking for some advise on the logs that we are seeing on
my firewall. Firewall is a VM hosted in Azure.FGT Version 7.0.11
Problem:User tries to login to server that is hosted in the DMZ (Azure)
using LDAP and it takes approximately 1-2...
Hi Team, I am in need of some assistance on an issue with wireless
clients in my environment (ALL FORTI Devices). Clients when roaming from
1 AP to another seems to get disconnected (althought it says connected
on their machine) and when checked the ...
Hi All, I am in need of some expert advise on this after exhausting
Forti TAC support. Details:FW: 7.2.4AP: 7.0 Build 0031 (latest).H/W:
U231FProblem: The AP's are all using the same channels and because of
that when users are roaming they get discon...
Hi Team, I have configured 2 IPSEC to the same remote destination and it
was working fine with version 6.4 however after the upgrade it stopped
working. The reason for that is that the Tunnel ID for the second tunnel
is assigned with an IP of 10.0.0....
Hi BillH_FTNT, I did perform the capture and investigated it via
WireShark.This is where i can see that the MSS is set to 1418.The one
very obvious differences that i can see is that the CWR is set to 1 on
packets that had retransmission and 0 on pac...
Hi Graham, Thank you very much for your assistance and the command that
you shared.I was able to prove from that command that the DARRP was not
working at all because it had no values on the RSSI and Inteferences.Its
all fixed now with the help of an...
I am also getting the following errors on the particular
AP-02:Association denied because AP unable to handle additional
associated stations.Wireless client authenticates through OKC failed
with no match
