rpozywak
New Contributor
‎11-16-2021
Last activity: Nov 16, 2021 10:50:38 AM
60 Profile 60% Complete
Most Liked Posts Recent Solutions
No Content Available

User Activity

I just recently installed two Fortinet 60D's firewalls in HA mode and set to active/active. On both firewalls ports 6 & 7 are connected to each other for heart beat connection. On port 5 of both firewalls they are wired into a single Cisco 2960s swit...
I have a Fortinet 60D firewall running 6.0.4 firmware. I just added a second ADSL line to the firewall on WAN 2. I currently have a ADSL line on WAN 1. Both ADSL lines have static ip's and the speed is equal on both links. Currently I have get 25mbs ...
I am currently running Fortinet 5.44 on a 100D firewall. Just recently some users started to complain about poor quality of phone calls. I started a wireshark on the VOIP vlan and ran RTP Stream analyzer on 30 mins of data that I collected. From look...
I have a Fortinet 100D firewall with two Internet connections connected to the firewall with the following port setup. Port 16 is the fiber connection to fiber provider at 1GB. On Wan1 I have a 100MB cable modem connection. In my static route setting...
At a remote site I have a 100mb Internet connection coming into a Fortinet 60D-POE Firewall. The users were complaining about slowness to the Internet. If I plug directly into the Cisco 3750 switch and run a speed test I get 30mb x 10mb. If I plug di...