Hello, We have a customer who will be sending us a VPN router to
facilitate a connection to their intranet and they have stated that I'll
need to allow IPSec traffic on port 4500. I tried to create a policy for
this but quickly remembered I have no i...
Hi all, I struggle through every step with these routers, very sorry for
the noob questions but please be gentle, I don't really know what I'm
doing here. So we were quickly exhausting our single class C network and
I decided to run another line from...
Hi all, I made my first attempt at creating an IPSec tunnel between our
main building (60c) and our new remote site (60e). On the remote side, I
can access the 60c at our main HQ with no issues, make config chances,
etc. From the HQ, I can access the...
Hi all, This should be an easy one for you experts! We just purchased a
second location for extra warehouse space, and I need to bridge the two
buildings. We have a 60C at our main site, and I purchased a new 60E for
the second site. The IPSec tunnel...
Thanks, Gus. More internal addresses is the goal, but changing the mask
seemed like the more complicated route. I don't fully understand the
ramifications of that change so I thought better to leave it alone.
Edit: I should also mention I have anothe...
Thanks for the advice, I'll ping the other side next time it happens and
check logs. I won't need to access the GUI this way often, if at all,
was just worried it was indicative of a larger issue. So far the tunnel
has been fine, so minor issue.
