Description This article describes an issue where it is not possible to
disable FortiAnalyzer logging, as the option to do so is greyed out.
Scope All FortiGates with Security Fabric enabled, and when configured
with FortiAnalyzer logging. Solution I...
Description This articles describes an issue whereby K-series Access
Points (FAP443K, FAP243K) do not have an option to set external antennas
in Access Point profiles. Scope FortiAP models 443K or 243K running
FortiAP v7.6.3 (or lower). Solution Some...
Description This article describes a step-by-step guide on how to enable
'Bluetooth Low Energy' (BLE) scanning on FortiAPs, and how to use
FortiGate diagnostics to view nearby BLE devices. Scope FortiOS v7.2 and
later. FortiAP models with BLE hardwar...
Description This article describes a method to block specific traffic
inside an SSID, without disabling all intra-SSID traffic. Scope All
FortiGate managed Wireless Networks (SSIDs). Solution In some cases,
administrators may need to block traffic to...
Description This article provides the common Protocol Numbers used in
FortiGate configurations how to use IANA-assigned protocol numbers in
FortiGate configurations. Scope FortiGate. Solution When configuring a
FortiGate, it may be necessary to refer...
Hi Alex,Internally, FortiOS software switches are actually a Linux
Bridge, so they are a Layer 2, kernel /CPU type construct. (The 'brctl'
part of the command you mentioned refers to 'Bridge Control').Hardware
switches on the other hand are not Linux...
IPSec with BGP routing is best practice. Place BGP on Loopback
adapters.https://docs.fortinet.com/document/fortigate/7.4.0/sd-wan-sd-branch-architecture-for-mssps/53445/bgp-on-loopbackhttps://community.fortinet.com/t5/FortiGate/Technical-Tip-ADVPN-wi...