Cybersecurity Forum

This forum is for all security enthusiasts to discuss Fortinet's latest & evolving technologies and to connect & network with peers in the cybersecurity hemisphere. Share and learn on a broad range of topics like best practices, use cases, integrations and more. For support specific questions/resources, please visit the Support Forum or the Knowledge Base.

JameMuno
New Contributor

MC4200 with a Corrupted SD Card. Anyone have a copy of the firmware?

Hello, i have a Meru 4200 with a corrupted SD Card. i am using AP320i access points. i am looking for a copy of the firmware and a copy of System Director. If someone can point me in the right direction. Thanks,

------------------------------
James
------------------------------
[FirstName]
[FirstName]
1 Solution
jbattam_FTNT

Hi James,

No worries, please download the image file below via the Fortinet Egnyte link. It's the latest MC4200 image compatible with the AP320 being SD 7.0-13.
You'll need to open up the MC4200, remove the compact flash card, connect it to your PC and use an imaging tool, such as Win-Image to load the image file onto the compact flash card.
Once complete, you can then put the card back into the MC4200 and it should boot up ok. Then run setup via CLI etc.

meru-7.0-13build-0-MC4200.img
Password: z2jU39hS
https://fortinet.egnyte.com/dl/LSj9kKJeHh

Kind Regards,

------------------------------
John Battam
CSE - Wireless APAC
Fortinet
Sydney | Australia
CWNE #327
------------------------------
John Battam
Principal CSE - Wireless/IAM International Region
Fortinet
Sydney | Australia
CWNE #327

View solution in original post

26 REPLIES 26
jbattam_FTNT

What version are you after for the MC1550?

------------------------------
John Battam
CSE - Wireless APAC
Fortinet
Sydney | Australia
CWNE #327
------------------------------
John Battam
Principal CSE - Wireless/IAM International Region
Fortinet
Sydney | Australia
CWNE #327
DustArne

8.3.3 would be great if you got it.
markdr_FTNT

Hi Dustin,

I have uploaded a copy of the firmware image for you as below.

Note that this is the full image so is a large file ~2GB.
---------------------------------------
meru-8.3-3GAbuild-0-MC1550.img
Password: 7rcA5Bv6
https://fortinet.egnyte.com/dl/TZjyodqg7J
---------------------------------------


Best Regards,
Mark Ribbans

Fortinet TAC Engineer
Mark Ribbans
markdr_FTNT

Hi Claes,

The linux recovery login is just admin / admin, but note this is a separate process to what we're discussing here.

The recovery image file is loaded via TFTP, the image file provided above is to re-flash the CF card using an imaging tool.

If you need the recovery image file instead, let me know.

Regards,
Mark

-------------------------------------------
Original Message:
Sent: Jun 11, 2020 10:00 AM
From: Dustin Arnett
Subject: MC4200 with a Corrupted SD Card. Anyone have a copy of the firmware?

8.3.3 would be great if you got it.
Original Message:
Sent: Jun 09, 2020 03:31 PM
From: John Battam
Subject: MC4200 with a Corrupted SD Card. Anyone have a copy of the firmware?

What version are you after for the MC1550?

------------------------------
John Battam
CSE - Wireless APAC
Fortinet
Sydney | Australia
CWNE #327

Original Message:
Sent: Jun 09, 2020 09:47 AM
From: Dustin Arnett
Subject: MC4200 with a Corrupted SD Card. Anyone have a copy of the firmware?

Yes, I am also looking for MC1550 image. Thanks.
Original Message:
Sent: Feb 24, 2020 07:05 AM
From: Claes Magnusson
Subject: MC4200 with a Corrupted SD Card. Anyone have a copy of the firmware?

Do you have an image for the 1550? Our controllers crashes everytime we try to upgrade. Thank you.
Original Message:
Sent: 08-07-2019 20:37
From: John Battam
Subject: MC4200 with a Corrupted SD Card. Anyone have a copy of the firmware?

Hi James,

No worries, please download the image file below via the Fortinet Egnyte link. It's the latest MC4200 image compatible with the AP320 being SD 7.0-13.
You'll need to open up the MC4200, remove the compact flash card, connect it to your PC and use an imaging tool, such as Win-Image to load the image file onto the compact flash card.
Once complete, you can then put the card back into the MC4200 and it should boot up ok. Then run setup via CLI etc.

meru-7.0-13build-0-MC4200.img
Password: z2jU39hS
https://fortinet.egnyte.com/dl/LSj9kKJeHh

Kind Regards,

------------------------------
John
CSE - Wireless APAC
Fortinet
Sydney | Australia
CWNE #327

Original Message:
Sent: 08-07-2019 20:15
From: James Munoz
Subject: MC4200 with a Corrupted SD Card. have a copy of the firmware?

Hi John,

My MC4200 stopped working and I have LED next to HDD on the face of the unit. So am guessing the memory card went belly up.
I am not sure which version of system director I need, I am using AP320s with the MC4200 so version would work best with these APs.

have a backup, so will try to reconfigure once get it restarted.

Thanks for the quick .



------------------------------
James

Original Message:
Sent: 08-07-2019 18:51
From: John
Subject: MC4200 with a Corrupted SD Card. have a copy of the firmware?

Hi James,

What System Director version did you need? Depending on how corrupt it is you make need to remove the compact flash card,  re-image it using WinImage + a controller image file. you have a backup or can reconfigure it.

Kind Regards,
John


------------------------------
John
CSE - Wireless APAC
Fortinet
Sydney NSW

Original Message:
Sent: 08-07-2019 13:25
From: James Munoz
Subject: MC4200 with a Corrupted SD Card. have a copy of the firmware?

Hello, have a Meru 4200 with a corrupted SD Card. am using AP320i access points. am looking for a copy of the firmware and a copy of System Director. If someone can point me in the right direction. Thanks,

------------------------------
James
------------------------------
Mark Ribbans
markdr_FTNT

I have uploaded a copy of the firmware image for you as below.

Note that this is the full image so is a large file ~2GB.
---------------------------------------
meru-8.3-3GAbuild-0-MC1550.img
Password: 7rcA5Bv6
https://fortinet.egnyte.com/dl/TZjyodqg7J
---------------------------------------
Mark Ribbans
ClaeMagn

Great and thanks!

Now the only thing I need is the login and password to the recovery in a 6.x version of our MC1550. Having that I'd be able to repair two more controllers…

DustArne

Awesome, thanks. So I just need take the cover off, pull out the CF card and reimage it now right.
MarkStan

Do you happen to have any resources on how to write the image to a CF card using WinImage?  When I mount the IMG file that you linked to, it has 6 different partitions.

Also, I tried to backup our CF card using WinImage and it created a VHD file.  Do you know where the configuration file is saved for the controller?  We aren't able to locate our backup.

Thank you for any assistance you can give!
MattP_l_

Hello,

I have a problem, corrupted card, but from screenshot pics I see the version 8.1-3-2 for MC4200. I downloaded 7 something image, but I thought that how do I update it back to the version where it was. I have only 832e APs.

I would be happy if you could help me. Thank you in advance!

Br Matti
markdr_FTNT

Hello Matti,

It is unclear to me what release you actually require.

Please confirm your controller model and the required firmware version and I'll see what I can do.

Regards,

Mark

Mark Ribbans