Hi, I have 2 connection for internet ,port 1 and port 2 are connected to
ISP for internet connectionLets sayISP 1, 191.X.1.0/24ISP 2,
191.X.2.0/24interface IPport1191.X.1.2/24port2191.X.2.2/24I have created
Ippool like belowisp1192.168.2.0 -snat -191...
Hi,I am currently utilizing SD-WAN for load balancing and failover
purposes with my internet service. However, I have encountered an issue
with my current setup regarding the use of 8.8.8.8 and 1.1.1.1 as for
SLA monitoring.The problem arises when th...
Hi, I am considering the following configuration: implementing OSPF
between the core and FortiGate. However, the core switches lack support
for multihoming, featuring only a layer 3 connection. In the current
topology, there is no aggregation on eith...
7.2Here the performance sla is manual , there is significant alert with
sdwan member dead or alive when I say "But it works if I change Ippool
to outgoing interface ip" means , it use the 191.X.2.2/24 for SNAT
instead of 1921.x.2.100Thanks
Hi ,As mentioned in the document does it require a helper router
https://docs.fortinet.com/document/fortigate/7.2.0/new-features/409099/ospf-graceful-restart-on-topology-changeThanks
Hi @rosatechnocrat site1 the actual dmz ip which is natted with the
external ip addresses are 172.16.12.0/24on fortigate it is
172.16.10.0/24 , so I am translating (one to one ) 172.16.12.0/24 to
172.16.10.0/24 For example on ASA , 172.16.12.50 natte...
