Hi,I am currently utilizing SD-WAN for load balancing and failover
purposes with my internet service. However, I have encountered an issue
with my current setup regarding the use of 8.8.8.8 and 1.1.1.1 as for
SLA monitoring.The problem arises when th...
Hi, I am considering the following configuration: implementing OSPF
between the core and FortiGate. However, the core switches lack support
for multihoming, featuring only a layer 3 connection. In the current
topology, there is no aggregation on eith...
HiI have the below topology , I want to migrate all dmz and dc networks
to site 2 .In the site 1 there are two firewalls ASA and FORTIGATE .The
perimeter firewall is asa . The Dmz network is 172.16.12.0/24 on ASA and
in the FG it is 172.16.10.0/24 . ...
Hi ,As mentioned in the document does it require a helper router
https://docs.fortinet.com/document/fortigate/7.2.0/new-features/409099/ospf-graceful-restart-on-topology-changeThanks
Hi @rosatechnocrat site1 the actual dmz ip which is natted with the
external ip addresses are 172.16.12.0/24on fortigate it is
172.16.10.0/24 , so I am translating (one to one ) 172.16.12.0/24 to
172.16.10.0/24 For example on ASA , 172.16.12.50 natte...
@Toshi_Esumi wrote:Sound like only PANs are handling public side and
PANs communication to FGTs seems to be over private subnets. Then I
would set your DMZ (you probably have it already as an interface) on
PANs and place those servers facing both sid...