Why Fortigate devices has this limitation? In many cases I'd like to
have static configuration on some hosts and also have address
reservation for them (in that case outside the dhcp range) just for
documentation purpose.
Hello, I want to configure SSL VPN authentication using FreeRADIUS, but
I want only users belonging to specific group to have access to the
network. Users and groups are stored on FreeRADIUS host as a local linux
users and groups. How FreeRADIUS user...
I need to remotely connect to D-LINK switch currently working on default
10.90.90.90 address (service guys have replaced broken one, but they
have forgotten to do initial config). The problem is it's connected
directly to one of the internal interfac...
In one of my networks I have about 100 users, 10-15 printers and a few
servers. Printers are statically addressed in IP range:
10.0.0.20-10.0.0.49. I don't have all IP's perfectly aligned in that
range, so to maintain this range on Fortigate is extre...
I've recently had the same problem on multiple 60D and 60C devices when
I was upgrading to 5.2.3.For some time, after clearing leases and
resetting client interfaces problem disappears, but it is annoying...
I've found this post
helpfull:http://community.arubanetworks.com/t5/AAA-NAC-Guest-Access-BYOD/Step-by-Step-How-to-Configure-Microsoft-IAS-Radius-Server-from/td-p/14391
After all I strongly recommend you to migrate your W2K3 server to any
newer versio...
Ok, after some time I've managed to set up RADIUS on Synology device.
Very simple and short setup in fact.There are some non standard config
files but generally it is still FreeRAIUS server, inside file located
at:/usr/local/synoradius/rad_users, I h...
