In the FortiOS 5.6 release notes, there is a new VDOM interface sharing
feature (launched in 5.6.1) :
https://docs.fortinet.com/uploaded/files/3602/fortigate-whats-new-56.pdfPage
238Create a virtual switch that allows multiple VDOMs to use the same
p...
Quick query... What does the "set inter-controller-mode l2-roaming"
command do?I cannot find any documentation relating to it. config
wireless-controller inter-controller set inter-controller-mode
l2-roaming set inter-controller-key ENC XXXXXXX set i...
Anyone got any experience of registering an existing "in production" FGT
HA pair with FortiCloud?Any guidance of what the best/recommended
process is? Regards, Pete
Does anyone know if it is possible to redirect wireless clients to an
external captive portal, but embed the MAC address of the wireless
client into the URL? Regards, Pete
I would avoid the 30E as it has no FortiOS 6.4 or 7.0 support. Latest
software version available at present is 6.2.9. I would go for a 40F
which has much better performance and will support software updates for
years to come.
This method relies on the FG being able to perform passive inspection of
unencrypted DNS responses. I don't use wildcard FQDN myself, however I
briefly worked in an environment where it had been configured but wasn't
working. As a test, I configured ...
You haven't said what the problem is, however I'm guessing that your
setup doesn't work when the FGT is connected to your core. Have you
added the routes to the core switch VLANs onto the FGT? Pete
You have a few options, including: * Use/Run dedicated CAT5/6, and use
HA1 and HA2. * Use dedicated VLANs on your active network for HA, and
use HA1 and HA2. * Use media converters, and use HA1 and HA2. * Use any
port (fibre or otherwise) for HA (bea...
