Re: Why devices are connected to 831F instead to t...

bravishank_FTNT · 02-18-2025

Hello Shlomin, You can try "radio-sensitivity" option in SSID. Once you enable it will have 2G & 5G Threshold value, if you modify them according to your environment it will make client pick a better RSSI (closer AP) to connect to. Thanks.

bravishank_FTNT · 01-23-2020

One of the FWF Platforms that supports Two Radios is FWF50E-2R. It can be operated in 2.4GHz and 5GHz band simultaneously.

Re: Enable 5GHz wifi profile · 01-08-2020

Hello Eric, FortiWiFi60E does not have Dual Radio. Hence you can operate at either 2.4GHz or 5GHz Band. Please follow the configuration as above and see if it works.

Re: Enable 5GHz wifi profile · 01-08-2020

Hello Eric, What model FortiWiFi are you currently using ? What is the FortiWifi OS Version ? Here is a sample profile configuration you can use for broadcasting an SSID in 5GHz Band. config wireless-controller wtp-profile edit "11n-only"============...

bravishank_FTNT · 09-17-2019

Hello Ron, As you mentioned there was Power Surge please make sure1. FAP Can boot up - Only way is to check the LEDs in the FAP. Check for Power & Ethernet LEDs2. If AP powers up, check the DHCP IP and try telnet or ssh into the FAP Also, what is the...

User Statistics

User Activity