The automatic backup seems to have an bug with the directory, or am I
doing something wrong?config is:config system backup all-settings set
status enable set protocol sftp set server "10.10.10.10" set user "user"
set directory "/home/user/incoming/" ...
Hi, I have a FortiWifi-30D and an FortiAP-11C, I'm trying to change the
country code of the FortiAP, but somehow it just doens't work. I get
this message:40: date=2015-08-08 time=12:27:16 logid=0104043528
type=event subtype=wireless level=error vd="r...
the "host 169.254.0.1" packets are different packets than the "ether
proto 0x8890" It is just that the sniffer cannot make a nice print
translation of the data of the ethertype 0x8890 packets. Using the
number 4 in the sniffer means;4: print header o...
Got this same issue and found this old question.
softwareupdate.vmware.com and auth.gfx.ms where the one my DNS server
noticed. I'm not using the default SSL deep-inspection profile, but I'm
also not able to remove it (FortiGate-30D). I noticed the T...
I have a setup where multiple fortigates are behind the same NAT IP. The
configuration is that they connect to a public IP where the FortiManager
is located. All those fortigates have the same IP address if you look at
the FortiManager, but you can l...
kevinboos wrote:Chris.Lin wrote:There is a new private build
here:https://dl.dropboxusercontent.com/u/58793690/mac/FortiClient_5.4.0.493_macosx.dmg
Would you guys give it a try? It works for now! Thanks! I did see this
link, but I was confused by the...
