Most Liked Posts Recent Solutions
No Content Available

User Activity

Hi All, Our current network is MPLS based with Layer 3 handoffs at 6 sites, managed by a Fortigate Cluster that we manage at each (advertising routes via OSPF to the ISP who redistributes across the MPLS (I think using BGP). Sites links are quite slo...
Hi All, We have dual WAN setup with primary being an MPLS tail (WAN1) and the secondary being a 4G/LTE connection (say WAN2 - via FortiExtender) which is used for failover. To keep both in routing table, default route is maintained for both with iden...
Hi All, We have an ' old' 3G modem performing internet termination in front of a Fortigate 60C at a small remote site. NAT cannot be disabled on the modem, nor does it support pass-through authentication allowing the Fortigate to pickup an external I...
Hi all, We have a number of remote sites with dual WAN connections and need to carefully manage bandwidth due to quotas and excess charges. These tails are Satellite or 3G connections and suffer from periodic outages. The sites are setup with an acti...
Hi All, Got a quick question which must be user error.. :) The CLI doesn' t seem to want to accept the Set Encrypt Enable setting.. MYFGT01 # config log fortianalyzer setting MYFGT01 (setting) # set encrypt enable command parse error before ' encrypt...