Hi, I have a small problem. I have new switch FortiSwitch 148F as
standalone mode.Now i have D-LINK 1510-52 switch and have problem with
move my existing configuration to FortiSwitch. Describy my
infrastructure:I have room with ISP Router connected t...
Hi,i have problem with correct settings for VLAN mangment.I have two
subnetsLAN (192.168.0.0/24) VLAN1 (connected to D-LINK Switch)MGM
(10.10.5.1) VLAN5 (FortiSwitch) Two switches are connected to my
Firewall SonicWall on separete port (PORT0 for D-L...
Hi, i try to connect my new switch F148 with my SonicWall GW.I create
VLAN on my sonicwall (ID 5), connect sonicwall to switch to port 23, and
connect one PC to port 21. On the switch create VLAN 5, and set native
VLAN 5, Allowe VLAN 5 on port 21 and...
I found the cause of the problem. Configuration begin work when i
disable Spanning Tree on port 48 on the new switch.I don't understend
why this is problem. Switch is connected to other switch only one port
(48 - 48)On second switch Spanning Tree is ...
Hi, ARP nothing show.192.168.1.200 - this is my laptop when i connect to
managment port direct. Currently to swich is connected more than 20
PCs.I checked in my other FortiSwitch whem full works and also has only
two entries.
I managed to find a solution.The problem was that the secondary
management IP address was set to the LAN address. After removing or
changing it, everything started working properly.
