hi, can someone please advise whether the fortigate will deep analyze
the packets if no security profile is applied? or just check based on
the source destination IP and service port only? thanks in advance! what
is the standard process when the pack...
hi, can anyone please advise how to check fortigate interface current
transmit and receive speed via cli? the command "diagnose hardware
deviceinfo nic port 2" only shows the overall packets sent or received
on that interface. Thanks in advance!
hi, can anyone please advise whether fortigate accept gratuitous arp
sent from other device (like router, load balancer...)? some network
devices will send out gratuitous arp when failover occur. thanks in
advance!
hi , can anyone please advise what is the default tcp handshake timeout
value? I know the default session time out value is 3600 sec. thanks in
advance!
hi, can someone please advise how to check the fortigate log to confirm
the traffics are blocked by the ssl security profile? The policy looks
allow. Thanks in advance.
hi @hjezzapaula , thanks for your advice. However, I did continuous ping
to the server from other network, not packet loss. The server is
directly connected to the firewall DMZ, and the firewall load is very
low now. The server is also at installatio...
Hi Kaman,Thanks a lot for your kind advice! I tried to use wildcard FQDN
*.fortinet.com as destination, but the traffics to fortiguard didn't hit
this rule. Can you pls advise the possible causes? Thanks in advance!
our dns server should be able to r...
