hi, can anyone please advise how to check fortigate interface current transmit and receive speed via cli? the command "diagnose hardware deviceinfo nic port 2" only shows the overall packets sent or received on that interface.
Thanks in advance!
Nominating a forum post submits a request to create a new Knowledge Article based on the forum post topic. Please ensure your nomination includes a solution within the reply.
Hi WQ
It is the same command. See the two lines in bold below.
FG # diagnose hardware deviceinfo nic port1
Description Fortinet 100D Ethernet Driver
System_Device_Name port1
Current_HWaddr xx:xx:xx:xx:xx:xx
Permanent_HWaddr xx:xx:xx:xx:xx:xx
State up
Link up
PHY Link up
Speed 1000
Duplex full
port: 4
def vid 4091
cur_vid 4091
netdev_running 1
stp: 0
mac_bypass 0
pci_rx 0
Rx_Packets 7851998
Tx_Packets 12224295
Rx_Bytes 1953613745
Tx_Bytes 14562918700
Select Forum Responses to become Knowledge Articles!
Select the “Nominate to Knowledge Base” button to recommend a forum post to become a knowledge article.
User | Count |
---|---|
1641 | |
1069 | |
751 | |
443 | |
210 |
The Fortinet Security Fabric brings together the concepts of convergence and consolidation to provide comprehensive cybersecurity protection for all users, devices, and applications and across all network edges.
Copyright 2024 Fortinet, Inc. All Rights Reserved.