How to check fortigate interface current transmit and receive speed via cli?

[WQ]

hi, can anyone please advise how to check fortigate interface current transmit and receive speed via cli? the command "diagnose hardware deviceinfo nic port 2" only shows the overall packets sent or received on that interface. 

Thanks in advance!

[AEK]

Hi WQ

It is the same command. See the two lines in bold below.

FG # diagnose hardware deviceinfo nic port1
Description         Fortinet 100D Ethernet Driver
System_Device_Name  port1
Current_HWaddr      xx:xx:xx:xx:xx:xx
Permanent_HWaddr    xx:xx:xx:xx:xx:xx
State               up
Link                up
PHY Link            up
Speed               1000
Duplex              full
port:               4
def vid             4091
cur_vid             4091
netdev_running      1
stp:                0
mac_bypass          0
pci_rx              0
Rx_Packets          7851998 
Tx_Packets          12224295 
Rx_Bytes            1953613745 
Tx_Bytes            14562918700