Hi, We are trying to setup to setup another SSL VPN to our FortiGate's.I
was wondering if it is possible to have two ssl vpn interface and two
public ips?We want to setup two azurer SAML entra ID's for the VPN's.TIA
:)
Hi,Application control is enabled. Client is attempting to access a
specific URL using HTTP.Browser_Edge, (on non-default port/non-default
port blocking is enabled) Running in FortiOS 7.2.8 Is there a way to
configurre an override for a specific IP c...
Hi, We have our customer encounter issues with their end users getting
VPN locked out and upon checking, the Forticlient still has their OLD
passwords.We already disabled the option "Allow client to save password"
under VPN Manager > SSL VPN > Portal...
Hi, I was trying to create dedicated HA management port for the firewall
cluster but "mgmt" wasn't listed as option under HA config. Could you
please advice if i have missed any configuration here.# showconfig
system interfaceedit "mgmt"set vdom "roo...
Hi,We are trying to implement a monitoring solution for our firewall
that indicates which ISP link is currently being used.The firewall is
connected to a single router provided by the ISP and there are 3 links
connected to the router. Which link thou...
Hi @dingjerry_FTNT Thanks for the information shared.Interface was used
in static route and after I removed it from that static routes , the
interface was appeared as an option.Just to confirm, if we are creating
a direct management access to each in...
Hi @kwcheng__FTNT ,Thanks for the information shared.Interface was used
in static route and after I removed it from that static routes , the
interface was appeared as an option.Just to confirm, if we are creating
a direct management access to each in...
Hi @scitlak ,Thank you for your reply. I'm afraid that doesn't work. I
already found these articles and tried that OID. It does bring lots of
BGP information, but it doesn't show BGP community information.What
about the API call? Is there any way of ...
Hi @pminarik ,Appreciate your response. Just to add, Client's DNS IP
will be the IP of this FGT interface.how or what is the process to
resolve FQDNs if the DNS is the FGT interface?Thank you!
