How would you recommend blocking all outbound traffic from a single
internal IP? The same IP has incoming services for FTP and another
custom service already. I want this server to ONLY be able to
communicate in or out over the 2 services I specify. ...
I am having a very difficult time with Apple products in general over
our wifi network provided by a FortiWifi 80CM. It is running MR3 P7 and
has been for quite some time. We get complaints and i have seen it
firsthand about the wifi taking so long t...
Is there a way to define a port range in the sniffer? For example can I
do: diagnose sniffer packet any ' host x.x.x.x and tcp port 6520-6540'
Thank you in advance, Tom
Perfect! I used 3 policies. 1 to allow the specific services in to the
server. 1 to allow the specific services out of the server. 1 to deny
all traffic to the server. I put them in that order as well. Works like
a champ! My LAN is port13 WAN is port...
Well that just opens up a can of worms. It just so happens and I didn' t
post this earlier to save on confusion that our entire network is
comprised of HP6535b laptops running the Atheros chipset for the
wireless. They constantly disconnect and recon...
Application Filter, plust FSSO on your domain crontroller. Problem
solved. You can filter your Marketing department group differently than
the rest of the company.
Bob, Can you elaberate on this setup? I have the SSLVPN setup like this.
Internal network 172.16.0.0/24 VPN Range 172.16.2.200 - 254 I' m trying
to add a rule to allow my internal network to ping the clients using the
SSLVPN.