Hello,i set up a vlan with public ip adress. I want to set up dhcp
server with clients wich receive adress on pool 10.1.0.0/24 with private
ip address (different than public ip address). I set a secondary ip
address on Web UI with private ip adress.W...
Dear all, i want to set up dhcp server on dedicated vlan for my clients
on fortigate.Basically, i want to import list of mac address which will
receive an ip from dhcp range (not reserved). On web UI, i did not see
any menu which allows me to do that...
Dear all, i want to set up fortiswitch 108F and managed it via Fortigate
201 F. I find this document which explains how achieving it
:https://docs.fortinet.com/document/fortiswitch/7.0.8/devices-managed-by-fortios/173260/configuring-fortilinkOtherwis...
Dear all,i have a fortigate 201F version 7 on NAT mode. Fortigate is
between core switches and top of rack switchs. I want to use 2 LACP
links to interconnect Fortigate with core (uplink LACP) and Tor switchs
(downlink LACP). 2 Lacp must be trunked i...
Dear all,i also received an answer from support which replies that my
configuration is not supported on fortigate
:https://community.fortinet.com/t5/FortiGate/Technical-Tip-Assigning-DHCP-Range-from-secondary-IP-address-of/ta-p/294731
Thanks. I'm on mature version 7.0 where this functionality is not
implemented.On this example, could you confirm that fortigate relay and
server could be the same physically equipment ?On linux, we could
implement many virtual interfaces where each i...
Thanks, i just realize i don't have fortimanager.I just own fortigate.
If i uderstand, tcl scripts can run and execute only on Fortimanager,
not fortigate ?
Thanks for your answer.I will try to set up a tcl script which will
parse input file and will assign address for each mac parsed. It must be
possible, musn't it ? It will be easier to do this on Tcl language
instead of CLI script.
