Hi guys, Hoping to find Fortigate WAF configuration and troubleshooting
help. I see the Fortigate docs provide bits and peices of this WAF
technology for FortiGate firewall (mostly just scratch the surface),
Youtube videos provide a little bit more i...
Hi Guys, Attempt 1 - failedI attempted to setup an IPSec VPN Aggregate
interface but received the GUI message no members available. Attempt 2
-failedI navigated via cli to vpn ipsec phase1-interface and edited my 2
active IPSec VPN tunnel interfaces ...
Hi folks,I'm attempting to setup my 2 testbed Fortigate 40F firewalls
6.4.10 to use their loopback interfaces to terminate a site-to-site
IPSec VPN tunnel. The tunnel is currently fully operational on the 40F
firewalls when not using loopback interfa...
Hi folks!! My Fortigate fw 40F OS 6.4.10 running in NGFW mode
Policy-based. OBJECT:Display packets being denied/permitted by the
Fortigate firewall policy; and reveal which policy denied or permitted
the packets. Fortigate fw running in Policy-based ...
Hi guys, As you can probably tell, I'm new here :) We are running
Fortigate firewall OS 6.4.10 - all is good!Trying to get a handle on
what this SSL policy rule is doing .... if anything at all, some basic
understanding would be greatly appreciated.T...
Thank you guys for all your assistance. I finally figured out how to get
the WAF logging operational and most of my valid traffic to the internal
server was flagged as invalid with an orange severity level but allowed
to pass or flagged as SQL Inject...
I removed all of the Security Profiles from the Security Policy -
(AntiVirus, Web Filter, Video filter, DNS filter, Application Control,
IPS, File filter) and only have Web Application Firewall (default) and
SSL inspection (not removable) enabled. I ...
Hi guys, I have my border fw setup and passing traffic. I see traffic
reaching my border firewall and being passed to my server (another
FortiGate used to simulate a web server). Log & Report, Forward Traffic
shows Allowed and Blocked traffic as expe...
THANK YOUYour sample screen shots only show the Aggregate interface [and
not the IPSec VPN tunnels] - I guess this is the correct GUI output but
since your aggregate is red -meaning down- I'm not sure this is actually
valid. Could you provide the CLI...
Thanks for providing reference documentation. But Yes, we used the
Fortigate documentation 6.4.x but unfortunately the documentation does
not provide a complete reference to the final setup nor explains how to
get the FortiGate to accept active in-us...