Hi everyone, thank you for taking some of your time to read this. We
switched ISP a couple months ago for a Bell Gigabit Fibe Ethernet. They
gave us a HomeHub 2000 that I had to put in bridge mode to stop it from
acting as NAT router (first problem)....
Hello everyone,Thanks in advance for taking the time to read.We changed
our ISP 6 months ago and I just saw an error in the "Static routes -
IPv4" : - New WAN1 as PPOE - Use fortiguard DNS servers to get a
fortiDDNS domain with the correct static ...
Hey everyone, first time posting ! I would need help, my situation is
that we have a subnet on a DMZ with a single PC holding our Filezilla
FTP server. When I connect from the domain, I can pull 1,000mbps
(100mo/s) from this pc. When I connect from ...
@Toshi_Esumi , thank you for sharing your setup. Fortunately, the ONT is
in the same room right beside the Fortigate. Did you have to tag your
packets ?
Thank you for your input @rosatechnocrat, I did some digging up and
found that Bell fibre uses VLAN 35. I will try to remove the DNS server
and redo the WAN interface. Actually, I might open a ticket with the
support team. Have a nice day,Felix
Thank you for your help Mayur, it is greatly appreciated. As a surprise,
retrieve default gateway from server was already activated. I simply had
to delete the static route. It clearly was a lack of maintenance when
adding the new ISP couple months a...
As I said in my first post, this one really puzzle me. When connected to
the pc on the DMZ subnet (Running filezilla server) everything works
fine.I can even download from the FTP while on the LAN and I get the
full 1,000mbps. No policy for restricti...
Sorry for the confusion Graham, The speed test I included above is done
on the pc running the filezilla server application. So the answer to
your question is : yes, the filezilla server is giving me full speed
internet access.I get ping time of aroun...
