Hi, I have two Wan interfaces, 1 and 2. Wan 1 is set for vlan 10 and Wan
2 for vlan 60.To be able for computers on vlan 60 use the wan 2
internet, I created a Policy Route below: The problem: There is an http
server in vlan 10 that hosts a website an...
Hi, I'm trying to make the settings on Fortigate to enable the RDP to a
server but is not working.I made the Virtual IP settings and I created
the policy: what is the problem? VIRTUAL IP:Name: RDP_virtualIP External
Interface: wan1External IP: 999.99...
Hello! I have a Fortinet 60D on a multi-VLAN network environment. Is it
possible to make the bellow settings, where port 1 is for all VLANs
trunk, and the others ports I can choose what vlan to assign? PORT 2
(vlan 10)-----DESKTOPS | | PORT 3 (vlan 2...
Hi! I have a Fortigate-50B (system 4.0 MR3) model, and I have to open
ports like 8080, 993,465 because these ports are not listed at
"Predefined" into "Services". All this traffic is being blocked by the
firewall. I tried to create port 8080 into "Cu...
Antonio Milanese wrote:Hi Ragno, Sorry I should have noted by the
screeshot that the FOS versio it's 5.x,5.2.x so PBR does not support
allow or deny(stop PBR) action as per 5.4 or 5.6 versions .. a
workaround it's to add (before your wan2 PBR) an ent...
Antonio Milanese wrote:Just add a PBR entry before (evaluation top/down
first match) with source vlan60_subnet destination wan1_subnet and
action stop policy routing.Antonio, Should I do this setting by command
line? I can't find the suggested option...
oheigl wrote:Is the virtual IP for the HTTP server configured with
interface any? Can you try to add another policy before this one, with
the destination of the HTTP server and the wan1 interface? Currently now
the virtual IP is set this way, isn't r...
Solved the problem: I just changed the port to 3386 on windows
registry(HKEY_LOCAL_MACHINE\System\CurrentControlSet\Control\TerminalServer\WinStations\RDP-Tcp\PortNumber)
and now is working. But I didn't understand why 3389 doesn't works.
I changed the policy to this way: From: wan1 To: vlan10source:
155.55.55.254 (outside client public ip)Destination: rdp_vipSchedule:
always Service: allAction: AcceptNAT: I tryed the 3 ways = disabled,
enabled, enabled+fixed port Also I tryed to set ...
