Dividing VLANs in two WAN links

[ragno]

Today I have 2 wan links, where WAN 1 holds all VLANs traffics, and when the WAN1 fail, WAN2 is automatically activated.

I made that, setting the distance value: 10 for WAN 1 and 20 for WAN 2 and creating two policies: VLAN10,20,30,40 to WAN1 and another policy VLAN10,20,30,40 to WAN2. This is working fine.

Now I want to devide the VLANs for each WAN link by this way:

WAN1 = used by vlans 10,20 and if this link fails, automatically WAN2 assumes the traffic. WAN2 = used by vlan 30,40

So if WAN1 goes down, WAN 2 will hold all the vlans: the vlans 30 and 40 that was already being used plus the vlan 10 and 20 that is needing internet connection.

How can I make that?

Thank you!

[ragno]

Any chance to make this work?