We are looking into a Remote FortiAP solution but have the need for one
ethernet port for a printer. Do anyone know if it´s possible to use a
FortiAP in Remote Mode with two ethernet ports like FAP-421E and
configure one port for printer VLAN?
Hi, having some issues that Forticlient is installed with some partially
information in Chinese.Is there any option to force Forticlient to
English only? Thanks.
Hi, have an issue with Bitlocker Network Unlock and a Fortigate. We have
configured DHCP relays to both the DHCP server and WDS where the
Bitlocker Network Unlock role is installed and can see that traffic to
both relays work fine. But when the clien...
Hi, we have some issues with a Fortigate 600D cluster. We can´t choose
any webfilter profiles at all in the GUI but it´s possible from the CLI
and also experiences strange behaviours where categories that shouldn´t
be blocked is. If we enable "diag d...
anyone that knows what the option other-application-log does?
"other-application-log Enable/disable logging of other applications"
Can´t find any documentation regarding it in the CLI reference and the
helptext in the CLI doesn´t say that much, what ...
wanglei@fortinet.com wrote:Hello Robin, Please let me know if I
understood your requirement correctly.
Switch/Router=======WAN-Port(FAP421E)-------(VLANID-100)LAN-Port=====Printer
If this is your requirement, you can achieve this by bridging the LAN
...
Having the same issue with FortiOS 6.2.3 1500D and FortiAP 421E 6.2.3.
The FortiAP retrieves the latest config but shows up as disconnected, no
trusted hosts configured. Anyone that are still experiencing the same
issues?
Hultis wrote:Hello, I have the same problem. Have you solved it? We
haven´t solved the root cause but did a workaround with a multicast
policy which only forwards broadcasts for port 67-68 UDP to be proceed
with the Bitlocker Network Unlock POC. conf...
