Description This article describes checking the CISecurity site for the
CIS Benchmark for FortiGate. Scope Above FortiGate v7.4.x. Solution It
is recommended to check the CISecurity site for the CIS Benchmark for
Fortinet, as it includes all the nece...
Description The error message 'Fail to update IPSA driver status!'
commonly appears after a scheduled update, particularly when updating to
v7.4.6, on devices including the 40F, 60F, 80F, and 100F models. Scope
FortiGate. Solution If the event log di...
Description This article explains the upper threshold limits for the
MV1548 and MV1680 temperatures of devices 80F. Scope FortiGate. Solution
The temperature details of 80F are provided below. r1-Dubai-fw-primary #
execute sensor detail[HW monitor se...
Description The article describes the intermittent disconnection of
FortiClient from dialup VPN due to DPD (Dead Peer Detection). Scope
FortiGate, FortiClient. Solution There have been instances where
FortiClient experiences random disconnections fro...
Description This article describes that from v7.6, a new feature called
ip-conflict-detect has been introduced. This feature helps in
troubleshooting by detecting and resolving IP address conflicts within a
network. This article will explore how this...
Hello @yeowkm99 I understand that you are trying to configure the email
alerts for FortiGate.Please refer this document which has detail
explanation of settings for email
alerts.https://community.fortinet.com/t5/FortiGate/Technical-Tip-How-to-configu...
Hi @Randy2 The latest version for Fortigate 60 F is 7.4.3.To upgrade
from your current version to latest, you need follow upgrade path from
this link.https://docs.fortinet.com/upgrade-toolAlso please go through
release notes of which ever firmware ve...
Dear Welma, Could you please check below:1)Are you able to ping to
FortiGate IP. 2)Are you able to telnet to SSL listening interface on ssl
port.3)If so, Please check if there are any restrictions in source
address of ssl vpn settings. 4)Also check i...
Dear Rezafathi,when you create VLAN interface on the firewall, VLAN
interfaces will be becoming your logical interfaces for policy
inspection, so in the source interface section of firewall policy, you
will need to select the VLAN interfaces in order...
Hello Umesh, Port block allocation is also a type of port address
translation (PAT). It gives you more control on how many ports to be
allocated to each lan IP from which the traffic is received on the
firewall and firewall should be NATing. As expla...
