Hi Folks, I have 2 WAN connections which I currently use routing
policies to send traffic out, I would like to know if it is possible to
cascade/overflow traffic from WAN1 to WAN2 when a certain bandwidth is
exceeded, for example: WAN1 hits 10Mbs usa...
Hi Folks, I have 2 ISP and I have just configured my 2nd WAN port and
added the new static route to my routing table on the FG with a higher
preference that my primary connection, at the moment I do not want to
use the load balanced/fail over mode of...
Thank you, I will give that a go. The only issue is the downtime in
setting it up as the current WAN ports need to be deleted along with the
policies etc to set it up. Cheers Eddie
Hi Toshi,Thank your help, unfortunately if I set the 2nd WAN port ahead
of the first (1st set to 20 2nd set to 10) traffic just stops which is
really weird. I can ping the public IP address of the 2nd interface from
the Internet so I know the routing...
Hi Ronald, Thank you for the information, I did try your suggestion and
I keep getting "invalid ip" no matter how I try and configure the Policy
Route. I have even tried it for the whole subnet and get the same error,
I have followed the FG doc you l...
