When creating new VMs on Promox 8.x or higer , the...

dennisv · 06-24-2024

When creating new VMs on Promox 8.x or higer , the VM license validation fails for FortiOS VMS (FortiGate/FortiAnalyzer/FortiManager etc).Reference https://community.fortinet.com/t5/FortiGate/Technical-Tip-VM-shows-License-status-Invalid-Copy/ta-p/23...

dennisv · 07-26-2019

I noticed this one on reddit aswell and here is a copy-paste of what I posted there. Here is what I did to get it working in VMware Player, but workstation should be the same. Default VM ovf (no hw04/vmxnet) , network in bridged mode.import vm edit v...

dennisv · 07-15-2019

Yes this seems like a configuration issue on the iDRAC side.You mentioned :"we already spoke with the server vendor and verified that only IP and gateway without vlan is configured."This implies the traffic from iDRAC to be untagged and HP port 1-18 ...

dennisv · 07-12-2019

@azwanarifYou should not put port 23+24 into an HP Trunk.HP Trunking is only for load balancing multiple connections from one HP switch to one Fortigate.In Fortigate this is called an aggregated interface.This is used for increase of bandwidth betwee...

dennisv · 07-11-2019

@rwpattersonIn HP Provision (Procurve/Aruba) you don't have to specify the vlans on the ports themselves, only on the combined Trk interface. @azwanarifI think I know how you setup the Fortigate to the Switch, but I don't know enough to verify.(( My ...

dennisv · 07-10-2019

@azwanarifThis seems an odd configuration.Usually clients are connected to untagged ports unless they are made vlan aware.For example with iDRAC, if you specify inside iDRAC it should use vlan X side it will become tagged. Connection between switches...

User Statistics

User Activity