Hi guys, I am trying to setup a hub and spoke topology using ADVPN with
branches on VPN dial up. The Hub has 2 WAN interfaces with public IPs
but on the other hand the branches sit behind 2 CPEs (2 different ISP
connections). Saying that, the 2 wan i...
Hi guys, I have a really complex network which combines many different
components and have to get it run for dot1x WiFi users authenticated via
Cisco ISE which checks AD BUT at the same time the FSSO collector needs
to grap that info so it can includ...
Hi Guys, I have an implantation which requires the fortigate to
recognize a user when it is connecting to WiFi over dot1x. The radius
server is Cisco ISE and the external ID I am using is an MS Active
Directory. The whole communication between the cl...
Hi Tpatel, Thank you very much for your reply. I do understand that BGP
will be performed by the loopback interfaces but as you say if wan 1
goes down then there will be only 1 available tunnle from wan 2. My goal
is to have always 2 tunnels availabl...
Hi Mrinmoy, Thank you very much for your response! Nonetheless, correct
me if I am wrong, but according to the link the loopbacks are being used
to establish the BGP between the Hub and the spokes. The VPN on the
spokes still use the wan interfaces. ...
