Description This article describes how to configure a Loopback interface
in FortiGate and access it for a public IP address. Scope FortiGate.
Solution Configure a loopback interface with an IP address not used in
the Network: config system interface ...
Description This article explains the meaning of the number in the URL
field for VDOMs. Scope FortiGate, VDOMs. Solution Specific number #
inserted before ?vdom=root represents the virtual link that has the GUI
dashboard for each VDOM. /ng/system/das...
Description This article describes how to allow specific IPS app
signatures in case other IPS alerts are needed. Scope FortiGate all
firmware.It is possible to allow IPS traffic in the IPS profile by
changing the action of the profile. Solution To al...
Hi @srqjan Please follow the doc -
chrome-extension://efaidnbmnnnibpcajpcglclefindmkaj/https://fortinetweb.s3.amazonaws.com/docs.fortinet.com/v2/attachments/4aa7d7af-6f90-11ea-9384-00505692583a/FortiOS-6.4.0-SD-WAN_Deployment_Guide.pdf
https://docs.f...
HI @srqjan Thank you for your question. Please follow the doc 0
https://docs.fortinet.com/document/fortigate/7.4.3/administration-guide/889544
https://docs.fortinet.com/document/fortigate/7.4.3/administration-guide/504287/sd-wan-designs-and-architect...
Hi Rakeshi You can follow the below commands: To enable anycast in the
FortiGuard settings:config system fortiguardset protocol httpsset port
443set fortiguard-anycast enableset fortiguard-anycast-source
fortinetend Please check the KB for more detai...
Dear @RolandBaumgaertner72 Please check the below doc related to your
issue:
https://docs.fortinet.com/document/fortigate/6.2.12/fortios-release-notes/413989/fortigate-30e-and-5...
https://community.fortinet.com/t5/FortiGate/Troubleshooting-Tip-How-t...
Dear @Alkosto1 , Please if you make a hard failover the Security profile
is shown in the New Primary (Old Secondary)? execute ha failover set 1
Caution: This command will trigger an HA failover. It is intended for
testing purposes. Do you want to con...