Description This article describes how to view the phase1 and phase2
status of the VPN tunnel on the IPsec monitor directly from the IPsec
tunnels page. Scope FortiGate 7.0 and above. Solution To view all the
IPsec tunnels built on FortiGate, select ...
Description This article describes how to send an email alert each time
an admin-level user’s password is changed. This enhances the security
posture of the network as password change might not be intentional every
time. Scope FortiGate 7.x. Solution...
Description This article explains the log message and how to resolve it.
FortiGate might receive the following log message ‘FortiGate scheduled
update failed’ a few times. Scope FortiGate. Solution The following CLI
command can be run to verify which...
Description This article describes how to assign affinity CPU mask value
to specify the CPUs that the FortiGate-VM can utilize. Since VM host CPU
cycles are allocated to processing FortiGate-VM's network traffic, this
setup may improve FortiGate-VM n...
Description This article describes how to troubleshoot on the FortiGate
if the shortcut tunnel is not created on one spoke but created on
another spoke. Scope FortiGate 7.x.x. Solution Assuming ADVPN with BGP
is implemented using the following docume...
Hello mohamed_mostafa, Do you see any specific error ? if yes, can you
paste it here for our review ? Can you also provide the details about
SQL server ? Thanks.
Hello, this might help you. someone have mentioned the steps to follow
if you can have a look at them :
https://answers.microsoft.com/en-us/windows/forum/all/could-not-open-key-verify-i-have-sufficient-access/febca544-a21b-4302-bc15-81f7887df807
Than...
Hello, it would be a good idea to run those commands on CLI when IOT
device can reach the internet and when it can not to troubleshoot the
issue.
https://community.fortinet.com/t5/FortiGate/Troubleshooting-Tip-First-steps-to-troubleshoot-connectivity...